Stainless steel perfection

Kappa

The Güde Kappa Güde Kappa modern design with seamless perfection forged from stainless steel.

KAPPA

The knives in the Kappa series are perfect for professional and amateur chefs because they meet the requirements of the guidelines for knives for use in the catering industry. The knives in the Kappa series are hand-forged from a single piece of chrome-vanadium-molybdenum knife steel and then finished in over 30 manual operations.

Find a dealer

They are stainless, ice-hardened and dishwasher-safe and offer unique weight distribution and balance thanks to the all-metal design. The traditional way of manufacturing and the innovative, high-quality design earned the series Kappa the Red Dot Design Award. Thanks to the all-metal design, they are even dishwasher safe.

Material

The blade material of knives has to meet a wide range of requirements, some of which are contradictory. It is therefore important to achieve an optimum between the different requirements. A knife steel should be hard, but not too hard, otherwise it would break. But it should also not be too soft, otherwise the knife would become blunt too quickly through wear. That is why the knives in the Kappa series from GÜDE are made of a chrome-molybdenum-vanadium knife steel that has an optimum hardness of approx. 57-58 HRc (Rockwell).

Learn more

The hardness of the knife steel of the series Kappa of 57-58 HRc is optimal for the different requirements that a good knife must fulfil.
Thanks to this hardness, the blade of the Kappa series knives is torsionally stiff and thus guarantees exact guidance of the knife and thus a precise cut. But even a hard steel, such as GÜDE knife steel, can be very flexible when ground very thin. A flexible blade like that of the Kappa fillet knife is particularly suitable for filleting fish by moving the blade back and forth between the skin and the fillet with a slight bend.

Manufacturing

Knives in the Kappa series are drop-forged from one piece of steel. Drop forging ensures high material strength even under dynamic stresses. During drop forging, the entire forging blank is heated and deformed. In up to 30 further steps, the forged blank is turned into a unique handmade knife from the knife manufactory GÜDE.

Learn more

After the knives have been roughly ground, calibrated and cleaned, the so-called ice-hardening process follows: the knives are cooled to -80 °C to improve the microstructure in the blade steel. In the next step, the knives are tempered in two stages, i.e. heated again and thus made unbreakable. The blade is then pre-ground, followed by pre-grinding of the back of the knife. This is followed by the fine grinding of the back of the knife and the sharpening of the bolster. The inside of the handle is now pre-ground. Pre-grinding of the bolsters is done in 5 steps. This is followed by the fine grinding of the blade. This is also called "pliestening". Now the back of the knife gets the finest grinding. The fine grinding of the front bolster follows and the knife handles are pre-polished. The handles are then finely polished. Then the knife edge, also called the bevel, is ground (honed) and the trigger is polished. The special GÜDE serrated edge is now applied to the bread knives, and the bolster to the dishing knives. Tomato, cheese and steak knives get their serrations. In the next step, the GÜDE logo is etched onto the blade. Then the knives are cleaned and the quality is checked. After that, the knives are placed in a sheath to protect them. Finally, the shipping bags are fitted with rivets and appropriate labels. The finished knives are now sent to the warehouse for shipping.

Form

In drop forging, the design language is free from the tip of the blade to the end of the handle. A design language like that of Kappa is only possible in the drop-forging process. That is why GÜDE has remained true to this proven technology since its founding in 1910, now in its fourth generation.
An unmistakable feature of many series from GÜDE is the so-called double bolster. A bolster is the thickening of the blade steel. The (front) bolster between the handle and the blade serves both as finger protection and balance weight.
The second bolster at the end of the handle gives the knives a better balance. This guarantees the user pleasant and fatigue-free work.

Learn more

On the knives in the Kappa series, the front and back bolsters merge seamlessly into the handle. This is because the knives in the Kappa series are forged from one piece of steel from the tip of the blade to the end of the handle. This results in a unique weight distribution and balance.
No seam, no material transition - simply drop-forged from one piece.

Function

A good knife must be sharp, stay sharp, fit well in the hand and be balanced so that fatigue-free and safe work is guaranteed at all times.
The hardness of the GÜDE blade steel with approx. 57-58 HRc (Rockwell) and the GÜDE bevel angle of approx. 33 degrees ensure optimum sharpness and edge retention of the Kappa series. The shape of the all-metal handle and the double bolster typical of GÜDE guarantee perfect handling and balance of the knives in the Kappa series.

Learn more

The bevel angle is particularly important in terms of sharpness and cutting performance: this is because cutting is "physically" the driving of a wedge through a material to be cut. The sharper the angle of the wedge, i.e. the bevel angle, the better this works. Bevel is the term used by knife makers to describe the cutting edge, i.e. the sharpened part of a knife. A sharp bevel angle makes a knife sharper than a blunt bevel angle. However, if the bevel angle is too sharp, the bevel can break. That is why the knives in the Kappa series Kappa GÜDE have GÜDE optimal bevel angle of approx. 33 degrees. This angle guarantees both sharpness and stability. The chrome-molybdenum-vanadium knife steel used in the Kappa series Kappa a hardness of approx. 57-58 HRc (Rockwell), Kappa that the sharpness lasts for a long time. This requires cutting on a suitable cutting surface, e.g., made of wood or plastic. The proverbial balance of the Kappa series knives Kappa thanks to the double bolster in combination with the all-metal handle. This creates a counterweight to the blade in the handle area. For the user, this means perfect balance and fatigue-free working. A secure grip is always guaranteed. The front and rear bolsters enclose the hand and thus protect against unwanted slipping, even when greater force is applied. The knives in the Kappa series Kappa what professional chefs and ambitious amateur cooks expect from a perfect knife. And thanks to the all-metal handle, they are also dishwasher safe. Handcrafted, forged from a single piece of metal, with the experience of centuries of Solingen knife-making expertise.

Our knife collections

We value individuality—especially when it comes to developing and refining our knife collections. This is reflected in every single blade that leaves our workshop, in the selection of particularly beautiful and tactile handle materials, and in a unique ergonomic design that enables and celebrates fluid, fast, and precise work.

Solingen knives, Güde , Solingen chef's knives, knife sets, sharpening steels, Solingen knives

Synchros

Alpha

Damascus steel knife

Delta

Karl Güde

Franz Güde

Caminada

Balkhauser Cottages

Gourmet x Güde

The exclusive "Feinschmecker" edition combines authentic craftsmanship from Solingen the high standards of Germany's leading gourmet magazine.

Asian Designs | Hand-forged in Solingen GÜDE

Discover Messer Icons

THE KNIFE.

Our THE KNIFE. truly lives up to its name: we conceived, developed, and forged this all-purpose knife with a particular focus on perfect ergonomics. Its unique shape and balance allow the hand to naturally wrap around the blade while cutting, making THE KNIFE. feel like a natural extension of the hand.

Bread knife

Güde in 1941 by master craftsman Franz Güde , the distinctiveGÜDE on our bread knives continues to delight bakers and bread lovers around the world today. The sharp serration of the unyielding, finely ground chrome-vanadium-molybdenum steel ensures that loaves, baguettes, and rolls are sawed rather than crushed, and that cabbage, melons, and crispy roast meats can be cut with ease. The elegantly simple handles, crafted from various high-quality materials, further contribute to the legend of our knives.

Utility knife

Our compact all-rounder is easy to handle and highly effective—not just when it comes to precise work with smaller items. Its fine serrations and double-sided hollow grind make our utility knife the perfect tool for peeling, slicing, and cutting vegetables, meat, fruit, and more.

Knife series

Messer Icons

Types of knives

Accessories

Service

Stainless steel perfection

Kappa

KAPPA

Our knife collections

Discover Messer Icons

⭐ Our Series

Accessibility

Profiles for quick access

Fine-tuning